Replacement Solderless Connectors - Brown

• These Brown "Quick-Connect" Solderless Connectors are included in some of our lighting fixtures and are used to connect the Pig-Tail wires from the internal light socket to any 12-volt power supply line.
• Works best with 12-Gauage Low-Voltage Copper Stranded Cable that has a thinner rubber installation.  They will not work on MALIBU 12/2 wire whose insulation is too thick to fit into the brown connector feed wire side.
• NO SPECIAL TOOLS NEEDED!  Only a razor knife to split the 12-volt supply line and a pair of plyers to crimp the connector closed and make the electrical connections. (see link to instructions below for more information)
• For wet locations, add a dab of Di-Electric Grease or Vaseline on the connectors metal probes before crimping close.  This will help to seal the electrical connections from corosion. 
• Sold in Pairs of 2 Connectors each.  

To View Paver Light Installation Instructions "CLICK HERE". 

NOTE: (To return to this screen, click your brower's Back Arrow located in the upper left corner of your screen.)