![]()
The Blizzard Sno-Wand provides users with a low cost, and versatile snowmaking capability.
The Sno-Wand works as an attachment with an air compressor (not included). It may also be used in conjunction with a pressure washer for greater snow output .

Quick & easy assembly takes less than 10 minutes without tools!
When attached to a garden hose with average household water pressure, and to an air compressor, the gun will produce approximately 12 cubic feet of snow per hour. Add a 2.1 gpm pressure washer and the gun will pump out approximately 50 cubic feet of snow per hour. Same as output as the Blizzard Sport!
Users can purchase or rent the required operating components. Please review the minimum component requirements presented below to insure compatibility. There is a possibility that non-compatible components may be damaged by normal use with the Sno-Wand.

Minimum Component Requirements:
Compressor
Operators should ensure that the compressor has the following capabilities:
Pressure Washer
Operators should ensure that the pressure washer has the following capabilities:
NOTE: Using component models that don't meet the specifications stated above for the purposes of snowmaking may result in damage to the component machines. TJB-INC is not responsible for damages to any components used with the Sno-Wand.
Requires outside temperatures of 25 degrees Fahrenheit or below.

Picture from my house of the wand in operation!
Other products in the category Residential Snow Making Equipment:
![]() Welcome! Serving Online Shoppers Since 1997 |
|||
|
|
|||