Power Control Center
The Power Control Center allows backyard water gardeners the flexibility of installing a pond where no electricity is near the pond site. Now you can control the operation of your pumps, U.V. Clarifiers, underwater lights, and other necessary items with the Power Control Center. The ultimate luxury to power your pond.
This has to be "The best thing since sliced bread" for ponders. One of the biggest problems with installing a pond is to add electricity near the pond. Now with this Power Control Center you have 50 ft of Grounded Cord. This means 50 ft from your current electrical outlet. Also, you have 4 - 120V electrical outlets and 2 - 12V low voltages outlets. And get this, there is are 2 digital timers: 1 for the 120V and 1 for the 12V side.
NOTE: Cal Pump transformers reduce 120 volt to a safe, economical 12 volt power supply for many low voltage applications, with the added convience of programmable digital timers. These transformers eliminate the risk of electrical shock to children and animals if the cable is accidentally damaged or cut. Ul Listed for underwater & dry applications
Installation
Locate the Power Control Center (PC50-15) in a dry and protected area. There are mounting bosses on the back of the unit for convenient installation. It is recommended that the Power Control Center (PC50-15) be mounted at least 3 feet above ground level. You may plug the unit directly into a properly grounded, grounding-type receptacle equipped with a Ground Fault Circuit Interrupter (GFCI).
Timer Controls
The minimum setting time is one minute and the maximum setting time is 24 hours. There are a total of six ON-OFF positions. The light will stay lit during the programming for one minute.
SETTINGS:
MODE- Switch to programming (the word "MODE" does not appear).
RUN - Automatic Operation
ON
OFF
To override the program, press the "MODE" button until "ON" is displayed. To turn off, press "MODE" button until "OFF" is displayed. For automatic operation, you must put the unit back into "RUN" mode.
NOTE: This unit is equipped with a RESET button. In the event of a programming malfunction, press the RESET button. This will clear all programs. Repeat STEPS 1 through 9 to program timer.
CAUTION:
Other products in the category Landscape Lighting Fixtures - Solar, LED, & 12-V / 12-Volt Transformers - Photo Cell & 24 hr Timers:
RELATED PRODUCTS
![]() Welcome! Serving Online Shoppers Since 1997 |
|||
|
|
|||