$359.98
-- These Pumps are ideal for Waterfalls, Ponds, and Larger Water Garden Features with a 3-YEAR WARRANTY
AquaSurge Water Garden Submersible Pumps
The heart of the ecosystem. The pump circulates the water from the skimmer putting it through the filter mats and sending it over to the bottom of BIOFALLS where it passes up through another set of filter mats and media. Water Garden Pumps are exclusively designed for use in a water garden skimmer. They range from 2000 gph up to 7,000 gph.
These pumps are ideal for waterfalls and larger water features up to 13,000 gallons but do not require the water to be pumped up to a high elevation (IE: Less than 10' in height)
The asynchronous motor design ensures that the impeller spins in only one direction; maximizing performance, reliability and minimizing electrical consumption.
3-YEAR FULL REPLACEMENT WARRANTY! (Customer only pays shipping)
Built-in carrying handles add convenience.
Pumps can be used vertically or horizontally.
Fish Safe - Uses no oil!
Recommended for use in a skimmer prefilter or MicroSnorkel Pondless.
The pump includes one 1½ inch threaded coupler and one 90 degree elbow to fit all applications (except for use with the AquascapePro 2" check valve dual-union assembly) & 20' power cord.
They're easy to use, just set in a skimmer, connect the 1.5" (2" on the 7000) out flow pipe to the waterfall, and watch the pump do the work.
All pumps in ADIs' product line are specifically designed to support the demanding requirement for 24 hour/7days a week operating condition of a water garden.
Continuous operation heightens the importance of proper pump selection to minimize power consumption yet deliver enough flow to produce the natural sights and sounds of a beautiful water feature.
For Pump Performance Chart, click on "View Enlarged Image"
* NOTE *: If you are using the AquaSurge Pump (2000, 3000, 4000, or 5000 gph) to replace an exsisting AquascapePro Pump (1500, 3000, or 4500 gph) and you have an Aquascape 2" Dual-Union Check Valve, you will need one of two special adapters.
For a Classic Series Skimmer (rectangler in shape), you will need the "Classic Series Adapter" (SCU#99144) & a small 4 oz container of "Christy's Red Hot Glue". To view installation video,"CLICK HERE"
For a Signature Series Skimmer (flat front with rounded sides and back), you will need the "Signature Series Adapter" (SCU#29475) No glue is required for this adapter. To view installation video,"CLICK HERE"
SELECTING A PUMP: Choosing a pump for a water garden should be based on a few job requirements. Desired flow, pumping height and electrical costs are all factors that need to be considered. The higher the pump needs to push water, the less flow you are going to get out of that pump. Pond Kits come with pumps sized to turn a pond over at least once per hour. Make sure your pump application follows the same guideline. If your applications' pumping height is close to maximum pump shut off height, substitute the next larger pump available.
To view a side by side comparison of the pumps we offer, "Click Here"
The AquaSurge 2000 is the new replacement for the AquascapePro 1500 which has been discontinued as of 1/1/2009
To view the written 12 page AquaSurge Pump Instruction Manual (English & French) in a Down-loadable PDF file that can be printed, click on the link at the end of this statement. "DOWNLOAD MANUAL"
For a copy of the PUMP TROUBLESHOOTING/WARRANTY GUIDELINES, "CLICK HERE".
NOTE: If you need this pump quickly, do not choose "Parcel Post" as your shipping option at check out. We have found that Parcel Post can take 3-4 days longer than what is listed as shipping times. Priority Mail will take 2-3 days to go from the East Coast to the West Coast. Additionally, Priority Mail can be tracked much better than Parcel Post.