TJB-INC - Water Garden & Pond Products / Liner, Underlayment, Seam & Repair Supplies / 3" Double Sided Seam & 6" Cover/Patch Tape / All Products

Aquascape's Pond Owners Manual For Water Garden & Pond Lovers

Sat, 23 Mar 2013 10:08:00 GMT

Aquascape's Pond Owners Manual For Water Garden & Pond Lovers
Buy Now: $3.99

Aquascape's

Pond Owners Manual

We offer a copy of the full color, 24 pg "Pond Owner's Handbook" in both as a printed booklet and as a download in a .pdf. This handbook covers all of the topics that a pond owner will need to know about.

Pond Ecology & the Aquascape System
Pond Fish - Health & Care
Aquatic Plants
Pond Myths
Maintenance
Pump Trouble Shooting

To download the .pdf file, CLICK HERE.

To view more Aquascape videos CLICK HERE

Visit 3" Double Sided Seam & 6" Cover/Patch Tape to see additional products in this category.

Firestone Lap Sealant HS for EPDM Rubber Liner

Sun, 22 Aug 2010 20:23:00 GMT

Firestone Lap Sealant HS for EPDM Rubber Liner
Buy Now: ~~$20.98~~ $17.99

EPDM LAP SEALANT

Firestone Lap Sealant is specifically designed edge treatment used to ensure a watertight seal while seaming two PondGard EPDM liners. This adhesive caulk serves as a final precaution against leaks and is applied to the outer edge of a seam. Firestone Lap Sealant applies easily using a caulk gun.

Made in the USA.
11 Oz Tube
20 - 22 Linear ft. coverage

Patching Small Holes or Tears

Use the 6" single sided tape. Thoroughly clean the liner area using Primer and an abrasive pad. Wipe clean with a paper towel. Remove the paper backing and apply the tape being careful to provide a smooth cover. Roll to provide pressure to all areas of the tape. Apply Lap Sealant to the tape edges for the final step and allow to dry for several hours before contact with water.

Firestone Lap Sealant HS Method of Application

Surfaces to which Firestone Lap Sealant HS is applied must be clean, dry, free of foreign materials and excess dusting agent. Clean with broom or rags if necessary.

Wait Before Applying Seam Edge Treatment
Wait to apply seam edge treatment a minimum of 4 hours after completion of a flashing unless weather is threatening. If weather is threatening, apply Firestone Spllce Adhesive to the edge of the flashing splice (next step below) before leaving the project. If weather is not threatening, the seam edge must be applied no later than the end of the next day following the completion of the seam.
Coat Flashing Step-Off:
Apply a layer of Firestone Splice Adhesive along the entire seam edge, a minimum of 1" on each side of the step-off following current Firestone Splice Adhesive application procedures. Allow the Splice Adhesive to flash off (get tacky).
Note: If the seam edge has beeen contaminated, clean the seam edge a minimum of 1" on each side of the step off with Firestone QuickPrime Plus and allow to dry, prior to application of the seam edge treatment.
Apply Firestone Lap Sealant HS
Apply a continuous bead of Lap Sealant HS approximately 3/8" x 1/4" centered over the flashing seam edge, using the plastic nozzle applicator supplied by Firestone. Be sure to keep the nozzle applicator centered over the lap step off. Refer to seam details.

Firestone Lap Sealant HS Coverage Rate

Approximately 20-22 linear feet of 3/8" x 1/4" bead per 11 oz tube

Visit 3" Double Sided Seam & 6" Cover/Patch Tape to see additional products in this category.

Aquascape Seam Tape Primer for 45-Mil EPDM Fish Safe Pond Liner in Water Garden, Stream, & Pond Use

Tue, 9 Oct 2007 16:29:00 GMT

Aquascape Seam Tape Primer for 45-Mil EPDM Fish Safe Pond Liner in Water Garden, Stream, & Pond Use
Buy Now: ~~$49.99~~ $44.99

Seam Tape Primer for EPDM Liner

Cleans and prepares liner for seaming.
1 Quart container.
Dry quickly and leaves the liner tacky and ready for seaming
Work well in cold weather
Dries faster than alchohol based primers
The 3" Double Sided Seam Tape & 6" One-Sided Cover Tape is used by pond professionals to seam multible pieces of EPDM Liner together.
TJB-INC recommends using the Aquascape Tape Primer to clean and prepare all surfaces before using the Seam & Cover Tape or Liner Patch.
For a more secure waterproof seam, use the 3" Two-Sided Seam Tape first, and then put down the 6" Cover Tape as a backup.
Both tapes are available in 25' lengths and 100' lengths.

To view the written "Seaming two sections of liner together" Manual (English & French) in a Down-loadable PDF file that can be printed, click on the link. "DOWNLOAD MANUAL"

Visit 3" Double Sided Seam & 6" Cover/Patch Tape to see additional products in this category.

Aquascape Double- Sided 3" EPDM Liner Seam Tape for Water Garden & Pond Liner

Tue, 9 Oct 2007 16:28:00 GMT

Aquascape Double- Sided 3" EPDM Liner Seam Tape for Water Garden & Pond Liner
Buy Now: ~~$52.99~~ $47.69

Double Sided Seam Tape for 45-Mil EPDM Liner

The 3" Double Sided Seam & the 6" One-Sided Cover Tape are used by pond professionals to seam multible pieces of EPDM Liner together.
We recommend using our Tape Primer (sold separately) to clean and prepare all surfaces before using the Double Sided Seam or Cover Tape.
Both sides of the Seam tape are very sticky. One side has a wax paper covering for ease of installation. The side without the wax paper his is the side you put towards the liner that you want it to stick to first.
For a more secure waterproof seam, use the 3" Two-Sided Seam Tape first between the two pieces of liner, and then put down the 6" Cover Tape covering the top seam.
Both tapes are available in 25' lengths and 100' lengths.

To view the written "Seaming two sections of liner together" Manual (English & French) in a Down-loadable PDF file that can be printed, click on the link. "DOWNLOAD MANUAL"

We offer a video presentation by Firestone describing the uses of EPDM Rubber Liner & how to install and seam the material. After you are finished viewing the video, click on the BACK arrow (located in the upper left corner of your screen) to return to this screen. "DOWNLOAD LINER VIDEO"

To view a printable .pdf copy of the MSDS (Material Safety Data Sheet) that has been filed with the EPA, click on the link at the end of this statement. "DOWNLOAD MSDS"

Visit 3" Double Sided Seam & 6" Cover/Patch Tape to see additional products in this category.

Aquascape 6" Wide Seam Cover Tape for EPDM Fish Safe Water Garden & Pond Liner & Hole Patching

Tue, 9 Oct 2007 16:28:00 GMT

Aquascape 6" Wide Seam Cover Tape for EPDM Fish Safe Water Garden & Pond Liner & Hole Patching
Buy Now: ~~$129.99~~ $116.99

6" Wide Seam Cover Tape for EPDM Liner

The 6" One-Sided Cover Tape is used by pond professionals to seam multible pieces of EPDM Liner together.
We recommend using our Tape Primer (sold separately) to clean and prepare all surfaces before using the Seam & Cover Tape.
One side of the Cover tape is very sticky. This is the side you put towards the liner that you want it to stick to.
For a more secure waterproof seam, use the 3" Two-Sided Seam Tape first, and then put down the 6" Cover Tape to seal the top seam.
Both tapes are available in 5', 10', 15', 25', & 100' lengths.
The 6" Cover Tape can also be use for patching holes in EPDM liner. Just dry the area around the hole, apply primer, let dry, then apply a piece of Cover Tape over the hole & press firmly. Hole is now patched!

To view the written "Seaming two sections of liner together" Manual (English & French) in a Down-loadable PDF file that can be printed, click on the link. "DOWNLOAD MANUAL"

To view a printable .pdf copy of the MSDS (Material Safety Data Sheet) that has been filed with the EPA, click on the link at the end of this statement. "DOWNLOAD MSDS"

Visit 3" Double Sided Seam & 6" Cover/Patch Tape to see additional products in this category.