Pair of Replacement Hold Down Tabs

These Hold Down Tabs are included in some of our lighting fixtures and are used to secure the base of the fixture. 

• Deck & Dock Lights - the tab secure the fixtures base to the installed surface by locking against the bottom of the surface.  (See Photo Below)  The tabs are adjustable for varying different surface thickness.  After the fixture has been installed, just push the tabs into the pre-made holes on the bottom of the fixture.  Continue pushing until the tab is tight with the underside of the installed surface material. 
• Paver Lights - the tabs go under the adjoining paver bricks and prevent the Kerr base fixture from rising.  (See Photo Below)  Install adjacient pavers and now the fixture is secure. (Not used with our 6" x 6" or 6"
•  x 9" Fixtures)
• NO TOOLS NEEDED!  Just use your hand to push the tabs into the pre-made holes on the bottom of the fixture.  (see link to instructions below for more information)
• Sold in Pairs of 2 Hold Down Tabs each.  

To View Paver Light Installation Instructions "CLICK HERE". 

NOTE: (To return to this screen, click your brower's Back Arrow located in the upper left corner of your screen.)

     Hold Down Tabs installed in the bottom of a Deck & Dock Fixture.

Hold Down Tabs installed in a Paver Light fixture locking underneith adjacient pavers.