15' Wide - 1 ¾" Length Premium Golf Fringe & Lawn Turf
This product can be installed in many different environments, indoor & outdoor. It is easy to seam and will hide the seam well if installed properly.
This turf has a good UVA resistant factor and holds up well in all climates.
An excellent replication of a Kentucky Bluegrass Lawn
It is a premium surface that can be used as either fringe for our synthetic putting greens or as a home lawn with out the fuss and care that real grass requires.
This Product Is Lead Free (per 2009 EPA Regulations)
Our Premium Turf pre-perforated so no ponding will occur after heavy rains. This surface is capable of draining 100 gallons of water per square yard per hour!
The turf is soft & safe for kids and pets.
The Premium Turf has the strongest fiber on the market today. Great for high use and play areas.
The nylon "thatch layer" provides a cushion area for extra comfort & safety.
Can be in-filled with 1 lb of 70 mesh sand and topped with 2 lbs of ground rubber for extra padding if needed.
Cost = $5.49 per sqft
Synthetic turf does not normally require maintenance after it is installed. Whether you choose a sand filled or non sand filled nylon turf, the surface of your green can be cleared of debris easily, by either blowing or sweeping the surface.
The Premium Turf/Fringe (901) is sold in a 15' width. We have listed many common sizes, but we can custom cut any length you need that is not listed on this site. (Maximum single roll length is 100' & minimum is 3'.) If you need to add 1 or 2' to your roll length, just check the boxes above and it will be added to your order.
If you require a custom length for your installation not listed, please call our office @: 203-287-0636 or E-Mail us @: tjb@TJB-INC.com
We offer a free E-Mail delivered copy of our putting green specifications & installation instructions if you send your request for them to: tjb@TJB-INC.com This free information will help you plan which green surface is best for you and what is involved in the installation process so you can better judge whether this is a project you can handle on your own or if you will need local professional assistance.
If you would like a material sample of our Premium Turf (901) , select it in the "Length of Premium Turf " box above. (It will be at the bottom of the list ). We will ship you out a sample of the turf by USPS Priority Mail. All you pay is the cost of shipping ($5.50). You will also receive a discount coupon of $15.00 on future orders over $250.00. Order must be a synthetic turf product, and does not apply to installation tools, accessories, or shipping. Maximum discount is $15.00 per customer or address.
The weight of this material is 86 oz/per sq yd
See Video Below for Detailed View .
Normal Shipping time for rolls is 1 week for delivery to your location. Alaska & Hawaii, a delivery surcharge will apply!
To calculate shipping costs: Add a product to the shopping cart. An orange colored " Calculate Shipping " tab will now show up on the right side of your screen in the blue area in the shopping cart section. Click on this " Calculate Shipping" and enter your zip code. Hit "Submit", and your shipping options & delivery times will now be displayed. If there is a choice, pick the option that best fits your needs. Customer/contactor is responsible for providing man-power/equipment to off-load rolls at delivery point. Orders to Canada may be slightly more. We will get an exact quote & contact you before processing order. Canadian customers responsible for duties & import taxes.
All of the surfaces we sell are 1st run production products. We do not sell or ship 2 nds , Returns, Clearance or Close Outs Specials. All of our synthetic surfaces are covered by the manufacturer's pro-rated warranties.
Our Premium Turf Specifications:
Roll Width : 15' (only)
Pile Height: 1¾" 44 MM BlendedPolyethlene Monofilament
Face Weight: 50 oz.
Fiber Gauge: 3/8" (between rows)
Primary Back: Dual Polypropylene
Secondary Backing: 20 oz Polyurethane
Face Yarn Type: 70% Delusted Blended Polyethylene Monofilament (Grass Blades) & 30% Polyurethane Textured Monofilament (Thatch Layer)
Stich Rate: 8.5 Stiches per 3"
Product Weight: 86 oz per Square Yard
Warranty: 5 yr Warranty for UV Degradation and Wear
Grain Angle: Slight (but is removed when infilled)
In-Fill Material: 100% Silica Sand “00” (or 70 mesh) & Ground Rubber (if desired)
Rate of In-Fill : 1lb of sand per sqft for golf fringe applications & 2.5lbs of ground rubber per sqft for lawn applications
NOTE: This Premium fringe/turf (901) is for Commercial landscapes, sloped areas, water saturated areas, pool areas and high traffic areas. Highly recommended for children play areas and pet areas. Golf Fringe, Soccer fields, Baseball, Use under Playground Equipment (when rubber filled).
The extra crimp in the thatch layer, called "Spring-Set" actually adds about 100% more to the crush-proof factor. Carefully examine other competitor's Fringes and see how much extra crimp our Fringe has. Our Fringe has the crimp look like a small spring. This resists crushing and matting that is common with "other" fringe greens sold by our compitition.
Polyethelene is very soft but tough. It will not crush and if it does, the crush marks will bounce right out.
Telephone or E Mail Advice from our own professional installation crew available at no additional charge.
To learn more about which putting green surface is best for you "CLICK HERE"
The Premium Turf surface will be rectangler when delivered. If used for golf fringe, just cut off what you need to create your fringe. Please remember to pre-plan so to eliminate waste and order enough Premium Turf to complete your job correctly.
If you are using this surface inside pool areas to provide a "no maintenance" grass area, use the rubber infill for a very soft surface to lay towels & chairs on.
Premium 9/16" Nylon Green with our Premium 1 ¾" Bluegrass Fringe
Installed by:
Newman Landscapes Design
They can be reached in California by calling (800)-971-TREE or newlandesign@gmail.com
TJB-INC INSTALLATION TIPS
SUB-BASE
Remove sod if necessary.
Grade must be at least 3 inches below the border (curbing, edging, patio, etc.).
Install at least 2-4 inches of 1/4" stone aggregate or compacted soil. Bring the grade up to 1 inch below the border Level and disperse aggregate with landscape rake.
Lightly soak the aggregate or soil.
Compact area using a hand roller.
More material may be added to low areas during this process.
Note: Aggregate & soil will stick to the roller if too wet.
SEAMS
Precisely cut the edge against the tufted row.
When seams are in position, place a nail approximately 18 inches from the seam to secure the turf.
Fold back the turf and hold with a temporary weight.
Lay 12-18 inch urethane seam cloth or biner fabric directly under the seam.
Secure cloth with a nail at the end of the seams.
Pour and spread adhesive on the cloth. (use scrap piece to spread adhesive) Remove the weight from the folds.
Slowly and simultaneously lay both sides of the turf on the adhesive. Avoid overlapping the backing. In addition, make sure the fibers do not come in contact with the adhesive.
Apply weight on the seams and allow 1hour to dry.
When complete, seams may be reinforced with nails.
EDGES
Overlap edges with turf.
Secure the position of the turf with nails.
As with seaming, fold back turf to the edge exposing the backside.
Cut vertical relief cuts to create smaller sections to work with. On the backside, cut the excess turf precisely to the edge.
Note: Turf should be cut within 1/8 inch from the edge.
INFILL Infill not required but can be added at this time depending upon your particular application. You can use dry fine or extra-fine silica sand available at any home center for balast. Rubber crumb can then be added for extra cusioning as required for your application.