Replacement Solderless Connectors - Blue
These Blue Deck & Dock Light Fixtures & Paver Lights from the internal light socket to any 12-volt power supply line.
Works best with 18-16-Gauge Low-Voltage Copper Stranded Cable that has a thinner rubber installation.
NO SPECIAL TOOLS NEEDED ! Only a razor knife to split the 12-volt supply line and a pair of plyers to crimp the connector closed and make the electrical connections. (see link to instructions below for more information These special 3M connectors are filled with silicone (Di-Electric Grease) so they are great for damp or wet locations. The grease will coat the connector's metal probes before crimping close. This will help to seal the electrical connections from moisture and help prevent oxidation & corosion of the electrical connections.
A great step up from the basic blue connectors found at Home Centers & Auto Parts stores
Sold in Pairs of 2 Connectors each.
Use to electrically connect a (tap) wire end to a through (run) wire, insulate and provide a moisture resistant seal for the connection. Moisture-resistant connection. The 804 connector is greased. Maximum insulation O.D. diameter of .145 inch (3,5mm). The connector shall be rated 600 volts and have a insulation temperature rating of 194(deg)F (90(deg)C).
To View Paver Light Installation Instructions CLICK HERE ".
Agency Approvals
UL
Color
Blue
Conductor Sizes
18 - 16 AWG / 14 AWG Stranded (Tap)
Connection Type
Run and Tap
Connector Style
Insulation Displacement
Family
IDC for Electrical Applications
Flame Retardant
No
Maximum Operating Temperature (Celsius)
90 Degree Celsius
Maximum Operating Temperature (Fahrenheit)
194 Degree Fahrenheit
Maximum Recommended Voltage Rating
600 V
Maximum Wire Gauge
16 AWG
Minimum Wire Gauge
18 AWG
Packaging
Box
Product Family
IDC for Electrical Applications
RoHS 2011/65/EU Compliant
Yes
RoHS EU Comments
RoHS 2011/65/EU compliant without exemption *Important RoHS information
Trademark
Scotchlok