AquascapePro Series - Water Garden & Pond Submersible Pumps (3000-10,000 gph)

AquascapePro High-Lift Pumps

The heart of the ecosystem. The pump circulates the water from the skimmer putting it through the filter mats and sending it over to the bottom of BIOFALLS where it passes up through another set of filter mats and media.

      AquascapePRO High Lift Pumps Feature:

• All of our Pro Series pumps have the updated seals that corrected previous poor seal designs on pre-2009 Pro Series pumps!
• Flame resistant thermoplastic polymer motor end cap,
• Glass filled thermoplastic polymer wet end,
• High efficiency air cooled motor,
• Double mechanical seal with outboard silicon carbide faces,
• Corrosion resistant stainless steel motor end bells, motor housing and hardware.
• These pumps were the first Water Garden Pumps that are exclusively designed for use in a water garden skimmer. They range from 3000 gph up to 10,000 gph. These pumps are ideal for higher waterfalls and larger water features. Built-in carrying handles add convenience. They're easy to use, just set in a skimmer, connect the out flow pipe to the waterfall, and watch the pump do the work.
• Click on "View Enlarged Image" for pump preformance chart
• Cord Length = 20',
• Discharge Thread Size = 2 inch MPT  (3" MPT on the 10,000 gph)
• ADI redesigned the seal/shaft interface (after many problems prior to 2005 & and in 2006 to early 2007 models), which provides the most durable, heat and abrasion resistant mechanical seals money can buy! Double mechanical seals. Aquascape horizontal pumps (3000, 4500, & 7500 gph) all utilize an industrial grade double mechanical seal in a nontoxic mineral oil cooled chamber. The outboard seal faces are long life silicone carbide material, which is a premium seal over the more commonly used, less expensive carbon ceramic seals found in most sump pumps.
• The 10,000 gph pump is the lightest high flow pump on the market at only 37 lbs!
• 2-Year Replacement Warranty!  (customer pays shipping only)
• When using the 7500 gph, use 3" pipe or dual 2" pipes to prevent damage to the pump.  You can use a 2" check valve but after that, split the line to the Biofalls into (2) 2" lines or use the 2"-3" converter and run a 3" line to the BioFalls.
• All pumps in ADIs' product line are specifically designed to support the demanding requirement for 24 hour/7days a week operating condition of a water garden.
• Continuous operation heightens the importance of proper pump selection to minimize power consumption yet deliver enough flow to produce the natural sights and sounds of a beautiful water feature.
• FREE STANDARD SHIPPING ON THESE PUMPS!

SELECTING A PUMP: Choosing a pump for a water garden should be based on a few job requirements. Desired flow, pumping height and electrical costs are all factors that need to be considered. The higher the pump needs to push water, the less flow you are going to get out of that pump. Pond Kits come with pumps sized to turn a pond over at least once per hour. Make sure your pump application follows the same guideline. If your applications' pumping height is close to maximum pump shut off height, substitute the next larger pump available.

To view a side by side comparison of the pumps we offer, "Click Here"

NOTE: As of 1/1/2009, the AquascapePro 1500 has been discontinued and are no longer available.  For a replacement, we recommend using an AquascapePro 3000 or the AquaSurge 2000.  The AquaSurge pump line comes with a 3-year warranty.  They are also available on our TJB-INC Store.