Back

Half Spindle - Hand Made Natural 100% Redwood Bridges For Gardens, Paths, & Ponds

These finely detailed bridges will complement your pond, creek, stream or yard

In Stock

Length of Bridge Span =:

In Stock

Price: $962.00

Ship To:

Quantity:

SKU: RGB-4'-Half Spindle

Shipping Weight: 80 lb.

Share this product and receive a $1.50 sharing discount.

Limit one sharing discount per purchase.

Sharing Discount has been applied

Tell A Friend

Summary

:

Half Spindle Bridges

These finely detailed bridges will complement your pond, creek, stream or yard.
Hand-built with hand selected redwood only.
Galvanized hardware
Deck screws are (Deck Mate) and have a Lifetime Guarantee against Rust and corrosion for life of the bridge!
The rails are about 25" above the walking surface and can be modified at time of initial construction higher or lower as needed
Pre–assembled pre-drilled and sanded.
Supports up to 750 lbs (Additional joists can be added to boost capacity if requested for an additional cost)
Assembly is quick and easy and can be done in as little as 60 minutes.
The only tools needed to assemble your bridge are a crescent wrench and a power screw driver.

Built in different lengths to last for many years to come!

4' Span: 30" wide with 26" high 4"x 4" Posts
6' Span: 32" wide with 26" high 4" x 4" Posts
8' Span: 36" wide with 36" high 4" x 4" Posts
10' Span: 36" wide with 36" high 4" x 4" Posts
12' Span: 36" wide with 36" high 4" x 4" Posts
Over 12', please call us @ 203-287-0636 for construction details & pricing

100% Redwood Bridge Construction Specifications

Thickness of Redwood Planks: 2" x 6" x Width of bridge
Thickness of Redwood Headers: 2" x 10" x Length of bridge
Thickness of Spindles: 1.5" x 1.5" x Desired height
Thickness of Finals: 4" Balls
Hardware: Counter-Sunk Deck Screws (Galvinized or Stainless)
Grade of Redwood: Sapwood or Heartwood
Guarantee: 100%

Note: Once your order is received, your redwood garden bridge will be hand built in about a week or less. It will be assembled, and then detail sanded. If you chose to have it sealed by us, it will be done next. Once this is complete, it will be numbered, lined and traced for easy assembly at your home. We then disassemble and carefully pack your bridge for shipping.

*(Note: It is always prudent to inspect any packages for consequential damage in transit. Once you have accepted delivery from any carrier, you become solely responsible for the contents.)

All orders are shipped F.O.B., Clovis, CA. Shipping charges will depend on the size of the bridge and your location. Bridges under 8 feet are shipped UPS 3-5 day ground. Over 8 foot are shipped motor freight

To calculate shipping costs: Add a product to the shopping cart. An orange colored "Calculate Shipping" tab will now show up on the right side of your screen in the blue area in the shopping cart section. Click on this "Calculate Shipping" and enter your zip code. Hit "Submit", and your shipping options & delivery times will now be displayed. If there is a choice, pick the option that best fits your needs. Customer/contactor is responsible for providing man-power/equipment to off-load rolls at delivery point. Orders to Canada may be slightly more. We will get an exact quote & contact you before processing order. Canadian customers responsible for duties & import taxes.

Installation instructions for bridge assembly

Start off with the 2 long beams (they are marked on the inside) and place them on the flat ground. Then get the planks (each one of them is numbered) and start from one end of the beams and match the number on the planks with the same number location that is on the beam, working your way to the other end. Look at the numbers and the lines that have been drawn to show you the correct location of all the parts. After you have all the planks screwed to the beams, start with the posts, which are numbered for correct locations. Also, bolt the posts on using a 9/16 wrench, looking at the trace lines for correct locations. Get the rails, looking at the correct numbers for correct locations. Screw the rails on the center post first -- you might need two people to do this, or better yet, a C clamp on one end, and then GENTLY pull down to where the trace lines are. Screw in place. That is all it takes to assemble one of our custom built redwood bridges. Remember, we have pre-assembled the bridge to make sure everything fits perfectly before we ship it to you and have you re-assemble it in your location.

OPTIONAL FACTORY SEALING

Because of the inherent nature of our 100% California Redwood to withstand the outdoor elements such as decay and rot, your Redwood Bridge really does not need to be finished. Many folks prefer to allow their Redwood Bridge to "age naturally" outdoors without any finish at all. Over time the color will weather to a handsome silver-gray highlighted by darker streaks, and the grain of the wood will become slightly raised.

Other folks like the rich look & luster of a clear sealer that brings out the richness of the 100% redwood. If you go this route you may find a wood sealer to be useful by blocking the pores of the wood. This inhibits the grain from becoming raised yet allowing the natural fading to a gentle silvery-gray color We offer an optional factory sealing of 2 coats of Thompson's Water Seal which is a waterproofer plus a clear wood protector.

The cost is $14.00 per ft length for our standard bridges and pro-rated for larger custom width bridges. (See photo's below). On the left is how your bridge will look when you receive it unsealed. On the right, is the same bridge sealed. Both bridges are shown with the optional Solar Post Caps (available below in "Related Items")

Unsealed bridge

Sealed Bridge

CUSTOMER REVIEWS

There are currently no reviews of this product.

New

CUSTOMER QUESTIONS (1)

New

11/29/2009 – SPECIFY THICKNESS OF PLANKS;HEADERS;SPINDLES;FINEALS
HARDWARE?STAINLESS STEEL ARE THEY COUNTER-SUNK
QUALITY GRADE OF YOUR REDWOOD.
WHAT IS GUARANTEES AND WARANTEES.SHIPPING COST FOR 8 FOOT-10FT BRIDGE TO 34990 DELIVERY INDOOR?

Response From TJB-INC: SPECIFY THICKNESS OF PLANKS
2x6s
;HEADERS;
10ft x10inchesx2 inches
SPINDLES;
1 1/2x 1 1/2

FINALS?
4 inch ball

HARDWARE?STAINLESS STEEL ARE THEY COUNTER-SUNK?
Deck screws,sunk,Galv or stainless

QUALITY GRADE OF YOUR REDWOOD?
Sap or heart

WHAT IS GUARANTEES AND WARRANTED?
100%

SHIPPING COST FOR 8 FOOT-10FT BRIDGE TO 34990 DELIVERY INDOOR?

Total Delivered cost to front door

$1800

The Solar lights and sealed will look great on this bridge
at a extra cost of $344

New

Product Details

Option	SKU	Price	Weight
Length of Bridge Span =: 4 Foot	RGB-4'-Half Spindle	$962.00	80
Length of Bridge Span =: 5 Foot	RGB-5'-Half Spindle	$1,090.00	80
Length of Bridge Span =: 6 Foot	RGB-6'-Half Spindle	$1,219.00	100
Length of Bridge Span =: 8 Foot	RGB-8'-Half Spindle	$1,359.00	110
Length of Bridge Span =: 10 Foot	RGB-10'-Half Spindle	$1,795.00	130
Length of Bridge Span =: 12 Foot	RGB-12'-Half Spindle	$1,986.00	140
Length of Bridge Span =: 4 Foot Sealed	RGB-4'-Half Spindle Sealed	$1,026.00	80
Length of Bridge Span =: 5 Foot Sealed	RGB-5'-Half Spindle Sealed	$1,154.00	90
Length of Bridge Span =: 6 Foot Sealed	RGB-6'-Half Spindle Sealed	$1,315.00	90
Length of Bridge Span =: 8 Foot Sealed	RGB-8'-Half Spindle Sealed	$1,454.00	110
Length of Bridge Span =: 10 Foot Sealed	RGB-10'-Half Spindle Sealed	$1,923.00	130
Length of Bridge Span =: 12 Foot Sealed	RGB-12'-Half Spindle Sealed	$2,115.00	140

Returning Customer? Log In | My Account

203-287-0636 | tjb@tjb-inc.com

Use Non-Mobile Version

Back Check Out

Calculate Shipping Redeem Gift Certificate

Privacy Policy Shipping Policy Return Policy

eCommerce Platform by TrueCommerce

Back

Submit Review

Please submit a review of the product Half Spindle - Hand Made Natural 100% Redwood Bridges For Gardens, Paths, & Ponds.

Your Rating:

Review Title: (Example Review Title: Highly Recommended!)

Your Name:

Submit Anonymously

Your City:

Your State/Province:

Your Country:

Your Review:

Submit Cancel

Back

Ask Question: Half Spindle - Hand Made Natural 100% Redwood Bridges For Gardens, Paths, & Ponds

Please ask a question about the product Half Spindle - Hand Made Natural 100% Redwood Bridges For Gardens, Paths, & Ponds.

Your First Name:

Your Last Name:

Your E-Mail Address:

Your E-Mail Address: (Re-type to confirm)

Your Question:

Submit Cancel

Submit Question: Half Spindle - Hand Made Natural 100% Redwood Bridges For Gardens, Paths, & Ponds

Thank you for your question about the product Half Spindle - Hand Made Natural 100% Redwood Bridges For Gardens, Paths, & Ponds.

Back

In Stock Notification

First Name:

Last Name:

Notify me when the Half Spindle - Hand Made Natural 100% Redwood Bridges For Gardens, Paths, & Ponds is in stock.

Submit Cancel

Close

Back

In Stock Notification

First Name:

Last Name:

Notify me when the Half Spindle - Hand Made Natural 100% Redwood Bridges For Gardens, Paths, & Ponds is in stock.

Submit Cancel

Close

Back

Tell a Friend

Your Name:

Your E-Mail Address:

This address will not be collected or stored

Your Friend's Name:

Your Friend's E-Mail Address:

This address will not be collected or stored

The e-mail to your friend will include standard text from TJB-INC, including a link to the product Half Spindle - Hand Made Natural 100% Redwood Bridges For Gardens, Paths, & Ponds and a picture, if available. If you would also like to include personalized text, please enter it in the box below.

Your Personalized Text: (optional)

Send Cancel