Kerr Lighting 12 v Commercial Paver Light 4" x 8" for Walk, Patio, Driveway,& Pool Deck Installation

Commercial Paver Light - 4" x 8"

• Actual size = 3 15/16" Wide  x 7 7/8" High x 2 3/8" Deep
• Light come with a 7-watt standard bulb
• This Paver Light is a safe and efficient 12 volt lighting system that will guide you and your guests into your driveway, through pathways walkways around pools and patios.... anywhere interlocking pavers are used.
• Thanks to newly developed technology, The Paver Light is now available for installation into pre existing, and new asphalt and concrete driveways.
• Paver Lights are a completely safe system which can be applied to residential or commercial applications and create a dynamic aspect to your landscape.
•  The Paver Light is made of the highest quality durable plastics, which can be driven on by cars and trucks. The top lens is made of a durable shatter-proof plastic that is 3/8" thick (measured at outer edge). So durable, we offer a two year manufacturer's warranty on the brick itself.
• The 12 volt system is safe and economical to operate and does not require a licensed electrician for installation. The bulbs, while easy for adults to change, are not accessible to children.
• The warm color appearance of the incandescent lamp included with each fixture is appealing since it’s similar to candlelight or the illumination of a kerosene lamp.
• The brick comes with a 7 watt wedge base bulb that has an average life expectancy of 2,000 hours.
• Great for any 4" x 8" Paver or Brick Installation
• Use in Walkways, Patios, Driveways & Pool Decks
• Kerr Lights can be set into asphalt & poured concrete with some special preparations.  (See information below or call TJB-INC for details @203-287-0636)
• Our Paver Lights come in several different configurations for commercial interlock applications as well as asphalt and stamped concrete.
• These lights are designed with extra ribbing, thicker and stronger lenses to withstand the day-to-day higher traffic in commercial applications.
• Each light comes with hold-tight tabs to secure the fixture to adjacent paver bricks.  (see photo below)
• These lights are very suitable for residential applications as well.
• The lights are sold individually, in bulk contractor packaging, and complete do-it-yourself kits complete with lights, connectors, low voltage wire, & proper low voltage 12 volt transformer.
• Kerr Lights are safe and economical.
• One of the strongest & most durable ground & surface installed lighting fixtures available today.  (Yes! you can drive over & park on them!)
• They also come with a 2-year manufacturer warrantee.
• PaverLight Fixtures are 2 3/8" 60 mil) thick to match with most interlocking pavers made in the USA & Canada.
• Easy DIY Installation Instructions are included with each order.
• 2-Watt LED Bulbs with 5-year warranty now available for these lights (If LED option is selected above, fixtures will come with both incandescent & LED to be installed by end user)
•  Replacement parts are always available & in-stock (if ever needed)
• TJB-INC supplies free technical help by calling 203-287-0636 or E-Mail : info@TJB-INC.com.

To View Installation Instructions "CLICK HERE". 

 A trick that we use at TJB-INC, is to place a white napkin on top of the pavers where you think a light should go.  (You may need to use tape or a rock to keep the napkin from blowing away.)   Then stand back and see how it looks.  It is much easier to move napkins that it is to move light fixtures.  Adjust as you feel necessary until you find a lay-out that you like.  Then you will know how many lights you will need to order and install to complete your project.

Available Quantities are:

• Individual Lights
• Box of 10 Lights
• Box of 20 Lights
• 8-Pack Commercial Installation Kit includes: (8) 3 15/16" x 7 7/8" 12-volt outdoor light fixtures (bases and lenses); (8) 7-watt lamps; (8) socket receptacles; (16) wire connectors; (1) 120-watt transformer with Photocell & Digital Timer; 50' 16/2 low voltage outdoor cable.
• 14-Pack Commercial Installation Kit includes: (14) 3 15/16" x 7 7/8" 12-volt outdoor light fixtures (bases and lenses); (14) 7-watt lamps; (14) socket receptacles; (28) wire connectors; (1) 120-watt transformer with Photocell & Digital Timer; 100' 16/2 low voltage outdoor cable.  NOTE:  If you have a long wire run , (Greater than 70') you might want to upgrade to the 12/2 cable which will have less line loss over longer wire runs.

TJB-INC INSTALLATION TIPS

1. When installing these lights in wet or saltwater installations, use a "Di-Electric Silicone" (available at local autopart or marine supply stores) or Vaseline on all electrical connections.  IE:  Remove the bulb from the socket, apply the Di-Electric Silicone on the base and re-install the light bulb into the socket.  This will prevent the minerals and salts from coroding the electrical connections.  You can also use this method on all of your wire connection to assist in the prevention of corosion over the years. 
2. Use the "L" shaped (included) hold down tabs to secure the fixtures to the ground.  You simply lift the adjacent pavers on the left & right of the lamp fixture.  Turn the fixture over, then push the hold down tabs into the bottom of the light so there is a tab to the left and right of the fixture which will extend under the adjacent pavers. (see photo below)  This will make it so your lamp fixture will not raise above the height of your pavers so there will be no tripping hazard, frost heaving, and a great deterant to theft.