4/1/2013 – I need some replacement bulbs, how do I replace them?
Response From TJB-INC: The replacement LED comes with the special tool and instructions. They are as follows:
1.Make sure all power is shut off to the light before
changing the bulb. The light housing must be
above water to properly service the light bulb.
2. Unscrew the ring nut from the front of the
light housing unit using the supplied lens key.
3. Remove the glass lens and o-ring from
light housing.
4. Remove the LED bulb.
5. Insert the new bulb
6.The o-ring and lens can now be installed
back into place. Make sure there is no dirt or
debris on the lens, o-ring and assembly prior
to reassembling.
7. Attach the ring nut onto the light housing.
8.Test to make sure light works
9. Position light back into pond.