Wall Eye II - 12 volt WARM LED Low-Voltage Landscape Light for Wall, Stair & Column Illumination

For use with any retaining wall, column, counter top, or stair system that has an overhanging top stone or coping that these lights can be mounted under.  Provide a WARM white (pure) light (3000 Kelvin) that is aimed down across the front of the face of a retaining wall or column creating wonderful interesting shadow patterns on the face of the stone.  The LED's will also provide a lit area in front of the wall & steps as well for safety & security purposes.

    AVAILABLE IN 4 DIFFERENT COLORED 1/32" (1 mm) THICK 304 STAINLESS STEEL HOUSINGS:

The Wall Eye II is an improved version of the original Wall Eye light from the now closed company, "Frog Lights".  TJB-INC went oversees to create this new updated version which is exclusive to ShopTJB.com in the North Amercian marketplace.  

On Sale 8/05/2019 - 08/18/2019 for $25.00 each!

For Wall, Column, & Stair Illumination

• Long Lasting LED's - No more burned out bulbs to replace
• Economical - 40,000 Hour Life (almost 14 years @8 hrs lit per day)
• Low Power - 2 Watts per unit    (2) 1-watt Phillips CMD LED's
• Durable Construction - Powder Coated 304 Stainless Steel will not Rot or Rust.  Can also be used in salt spray applications.
• Weather Resistant - Sealed & Rustproof, ideal for Outdoor Use
• SAFE - Cool to the touch  ... Low Burn Risk
• Long Wire - 72" (182 cm) Lead with UL/18-2 SPT Low Voltage Cable (UL Rated) & 3/8" (1 cm) Stripped and tinned (soldered) for easy connections to power feed cable. Will fit through a ¼" hole. 
• Easy to Install - Simply slip under the cap stone on Block Walls, Columns or Stairs (Before gluing down cap). 
• Veratility - Use with Steps, Walls, Columns or Counter Tops.
• Connects to any 12 Volt AC or DC Transformer
• Lightweight but super strong @ 6.5 oz each
• No more wasted block from cutting & chiseling like needed for some light fixtures installations!
• Installs in Minutes under coping- NO Cutting & NO Drilling!
• Can be retrofitted or installed lower in the wall as well. (See New Design below)
• Each Phillips LED Unit has (2) 1-Watt flat CMD's (Latest Technology) WARM White LEDs producing 27 lumens @3000 Kelvin with a built in driver/rectifier.
• Optimum Voltage is 12 v AC/DC but will operate in a range voltage from 8-12.5 v AC/DC
• The weather sealed LED unit is secured by two 3mm x 10mm stainless steel studs with two stainless steel nuts 
• Space fixtures from 36" to 72" apart (depending upon amount of lighting desired)
• Fixture measures: 5 9/16" (15 cm) Wide x 3 1/8" (8 cm) Deep x 1/32" (1 mm) Thick
• LED unit & flange stick out 5/8" (2 cm) from the mounted surface with a 1/2" (1.25 cm) reveal 
• Use with any coping that has a 1" or greater overhang  
• Units can be painted (by you) to match any decor situation. 
• PLEASE ...  Install & test lights before coping or cap is glued down.
• Fixtures Blend into the Landscape (see photos below)
• Conforms to UL STD 1838 & Certified to CSA C22.2 No. 250.7
• Dealer opportunities available (Contact if interested)
• FREE USPS SHIPPING (Lower 48)
• NEW DESIGN - Allows you to retrofit lighting into existing installations easily. The Wall Eye II installs into your masonry crack with a simple 7" circular saw with a masonry blade to create the mounting space and a 1/4" masonry bit to feed the wire through. 

A Black Wall Eye II is located under the coping in the center of the photo on the right. Photos are of the Cool (4000 K) LED unit but you can see how far the unit lights away from the wall face.

3 Rust (Brown) Cool Wall Eye II's are mounted under the coping of this 1' high display wall.

 The night photos were taken in complete darkness at our Display Gardens in Hamden Ct.   The photos were take by a non-professional (me) with an automatic digital camera.  The Wall Eye cast a wonderful downward light across the face of our tumbled display wall system.  The light was a pure white light, not a yellow like halgon bulbs produce.  On the larger 3' high wall, the 3' area in front of the wall was also lit up by the LED's from the Wall Eye lights as well as the face of the wall.  I spaced the WallEye lights every 6 feet and was able to have the light overlap on the ground. 

I was able to reduce the power draw to 12 watts for the 6 lights that I installed, down from the original 60 watts that was there with the 10 watt traditional low-voltage fixtures.  

I highly recommend these WallEye lights based upon my experience with many different kinds of lighting fixtures over the past 35 years in business.   ...  Ted Greiner (President & CEO  TJB-INC)

Below are photos showing the difference between the Warm & the Cool LED's.  The top set is on a gray colored wall and the bottom set is on a brown colored wall. See how the color of the light makes the wall, pavers, & grass look different.  We sell both the lights in either Warm or Cool LED's