Wall Eye II Transformer & Wire Set
To help our customers with the correct transformer & wire selection for the Wall Eye II lights that we offer, we have come up with a select transformer and length of wire that will handle most Wall Eye II installations. We have found after 1,000's of sales that most customers want a transformer with lots of featurers so we have selected the MoonRays 100-watt programable because of what it can do.
100-Watt Moonrays Transformer
- Old style mechanical dial timer has been replaced by more reliable photocell.
- Set desired on time in 2, 4, 6, or 8 hour intervals after sunset, Automatic Dawn to Dusk, or controled by a switched outlet.
- No need to adjust for time changes, or seasonal changes of sunset.
- Does not need to be adjusted to reset after power outages or daylight savings.
- Raintight case and 4ft,18-Gauge power cord ensure safety for outdoor use
- Durable plastic construction for lasting outdoor use
- Can be mounted to side of a house, deck, or post
- UL listed for outdoor installations and mounting
- Small Footprint (7¼" H x 5½" W x 4" D)
- Can power up to (45) Wall Eye LED Lights
- Weight = 7 lbs
- 1-year limited warranty
16/2 Low Voltage Cable
- This wire/cable is used in all low-voltage lighting applications.
- Wire = Solid Core & Cable = Stranded Core
- We use and sell cable. But not to confuse everyone, we will call it wire because to the common consumer, it it is the same thing.
- Our cable is multible stranded 32 gauge copper and remains flexible when cold.
- For wire/cable, the lower the wire gauge, the more strands of copper = thicker mass of condutive material and less internal frictional line loss. IE: 16/2 is thicker than 18/2. The first number 16, is the wire gauge. The second number/2, is the total number wire/cable runs attached together as a unit. Low-voltage applications require 2 wire/cable runs. One each to carry the power to your fixtures. 110 volt requires a 3 wire/cable run because building code requires a seperate ground wire that low voltage does not.
- Can be used to power our terrestrial & aquatic lighting fixtures.
- Rubber insulation has 1 ribbed & 1 smooth side for ease of polarity installations where needed.