Professional Ultra Foam Gun
Spray gun is designed for the application of single component, polyurethane foam. (We call it "Black Pond Foam"). This gun is our most technologically advanced gun for heavy-duty use. Designed in cooperation with major polyurethene foam manufacturers, our Pro Ultra Foam Gun will exceed the requirements of the most demanding professional. The difference is noticeable!
- Easy way to dispense black waterfall foam around rocks.
- Trigger allows for quick start & stop flow of foam.
- Internal shutoff eliminates waste dramatically with no post dispensing drip.
- Features extended barrel for long reach applications.
- Easy to vary bead size, just apply pressure to trigger.
- Restartable up to 30 days.
- Encreased Output
- Higher Foam Expansion
- Self Cleaning Needle Tip
- Sturdy metal construction
- Teflon coated brass body & basket
- 7" barrel length
- Professional Quality & used by Pond Contractors worldwide.
- Total length of gun = 13"
- Net weight = 600 grams/1 lb. 4 oz.
- ISO 9001 Certified
- Made in Italy
TJB-INC TIPS:
This our choice of black foam dispenser in our water feature construction division. It is very reliable and allows for quick & easy construction of waterfalls & streams. Remember to not remove the foam can unless it is empty. When you remove a foam can, you must use a cleaner can with a spray nozzle to remove any residual foam from the can attachment area. If you forget, when you put the new foam can on the gun, the left over foam will cause the new foam can to adhere to the gun permanently. You most likely have to purchase a new gun.
Remember to attach a cleaner can to the foam gun after every 4 foam cans to clean the gun of foam. Spray the cleaner through the gun until no more foam can be seen. If you plan on leaving the can on the gun for longer then 30 - 45 days, then you should remove the foam can and clean the gun with cleaner as described above.
Following these instructions will allow you to use your foam gun over and over again. If not, we have additional foam guns in stock if you need to order a replacement. We also recommend always having a clean back-up foam gun available on site if your primary gun clogs so you can finish your project with out any additional delays.
NOTE FROM SHOPTJB: For proper flow of foam, the foam can temperature must be above 50 degrees. If you are planning to use the foam when the outside temperatures are below 50 degrees, make sure to warm up the cans/foam by using a car or truck heater or put cans in the sun to warm up the foam. TJB-INC puts the foam cans on the dashboard of the truck in the sun and we use the truck's defroster to keep the cans warm when we are working in colder weather.
Watch the video below and see how a stream & waterfall come together and the proper use of Black Waterfall Foam to secure rocks & control water flow.
