TJB-INC - Landscape Lighting - Solar, LED, & 12-V / Paver, Deck/Dock, Stair & Retaining Wall / Replacement Parts & Bulbs for Kerr Lighting / All Products

12 Volt AC/DC Dauer T5 Wedge LED with 13 SMD 5050 WW Flat Chip Diodes - 2 watt - 5 Year Warranty

Mon, 5 Jun 2017 10:24:00 GMT

12 Volt AC/DC Dauer T5 Wedge LED with 13 SMD 5050 WW Flat Chip Diodes - 2 watt - 5 Year Warranty
Buy Now: ~~$21.75~~ $13.85

2 Watt LED Lamps

The Dauer Lampen 2 Watt Wedge is a high powered 12 Volt (AC or DC) lamp. It uses (13) highly efficient 5050 SMD Flat Chip LEDs which use only a total of 2 Watts of energy while maintaining a very nice quality of light. Light output is similar to a 7 watt Standard bulb with 28% of the power required by the 7 watt bulb. These lamps are virtually identical in physical size to a standard Wedge bulb which makes them ideal for many different lighting applications including retail lighting, accent lighting, recesses lighting, track lighting, landscape lighting, & architecural lighting. TJB-INC uses them as direct replacement LED lamps for the Kerr Lighting line of products (Paver,Retaining Wall, Deck & Dock Lights).

5 year full warranty (not pro-rated)
50,000 + hour rated life
Operating cost is $0.005 per 24 hr run time (@$.10 per KW)
(13) Large CMD (top of the line) High Output Flat Chip Diodes
360 degree light spread
IP65 Rated for Dust & Water
Warm 2800 Kelvin Light Temperature (Warm White)
Lumen of 165 lm at full power
Highly efficient chip set at 87.5 lumens per watt
Light output similar to a Standard 7-watt bulb
Replaces a 906 & 918 bulb
Suitable for enclosed fixtures - Low body temp <60 degrees Celcius
UL Listed for Damp Locations - Lamps are coated with a thin plactic film to make them weather resistant. (Not for water submersion)
Energy Star Rated at 2 watts
Quanity Discounts at 10+, 50+, & 100+ Lamps

NOTE: TJB-INC did a 9 month test using LED lamps from 8 manufacturers to see which product would hold up the best over time. The LED lamps were put into our Paver, Retaining Wall, Deck & Dock Kerr lighting fixtures in our outdoor displays. They were subjected to the same conditions you would have at your location. We quickly found that you get what you pay for. Within the first 2 months, several of the LED's stop working. At 6 months, several more began to fail. At the end of the 9 months, one brand was head and shoulders above the rest. The LED lamps from Dauer Lampen. Their LED's were as good as the day they were installed. They also come with a full 5 year warranty, not 90 days to 2 years or pro-rated like the other manufacturers. Because the LED's do not produce the heat the standard bulbs do, the lenses on the light fixtures will not need replacement as often due to the discolorization from the heat given off by standard bulbs.

Use the Comparison Picture below to see the difference between the bulb/lamp options we offer. We used (5) Residential 4" x 8" fixtures below to show the the different lamp outputs all using the same power source. To view this larger, go to the main photo above and click on "View Enlarged Image".

Visit Replacement Parts & Bulbs for Kerr Lighting to see additional products in this category.

Kerr Lighting Dual Replacement "Flat Wedge" Style Light Socket Used in Kerr 6 x 9 inch Paver Lights

Mon, 16 Jun 2014 07:30:00 GMT

Kerr Lighting Dual Replacement "Flat Wedge" Style Light Socket Used in Kerr 6 x 9 inch Paver Lights
Buy Now: $8.95

Kerr Lighting - Duel Replacement Light Socket

These pre-wired sockets can be used in all newer Kerr Lighting 6" x 9" Fixtures, California, Camolot (formally called Cambridge), & New Age Paver Lights.
Socket has an orientation hole in the bottom of the flat portion of the socket. (see photos)
Accepts a 12-volt, T5 "Flat Wedge" Style Bulb used in all Kerr Lighting and most other outdoor lighing fixtures that use a "Flat Wedge" Bulb.
Each of the Pig-Tail Wires are at least 8" in Length
Pig-Tail Wires are 22-gauge/Copper Stranded AWM Style 1230 rated to 105 Celcius and to 600-volt FT1 (Electrical Engineer Jargon)
The black sockets have a pair of brass clips for bulb contacts & retention.
Click on "View Enlarged Image" (under main photo) to view new style socket mount in a light fixture.
Sold as a Pre-Wired Pair.

NOTE: These sockets will not fit the 3156 bulbs used in some newer lighting fixtures.

SHOPTJB TIP: If you need replacement sockets for older Kerr lighting fixtures and they do not have a hole in the middle of the socket, you will still have to use these sockets. The original manufactuer of the non-hole sockets no longer exsists. You can use these new sockets but you will have to modify the mounting. The old style sockets used a wider profile clip system and the newer ones are too small for the clips too work. Do not panic! There is a solution. What we have used that does works, is getting a tube of black silicone (Window & Door or Kitchen & Bath), then squirting a blob on to the fixture base between the socket clips. Then, place the new replacement socket flat down into the silicone. Use some tape to hold in place until the silicone hardens in 6-12 hrs. Repeat for the other socket. Then remove the tape and the new socket will be secured in place ready for use. The silicone is a great adhesive as well as being waterproof.

Visit Replacement Parts & Bulbs for Kerr Lighting to see additional products in this category.

12 Volt AC/DC Dauer T5 Wedge LED with 27 SMD 5050 WW Flat Chip Diodes - 3.3 watt - 5 Year Warranty

Thu, 7 Nov 2013 15:16:00 GMT

12 Volt AC/DC Dauer T5 Wedge LED with 27 SMD 5050 WW Flat Chip Diodes - 3.3 watt - 5 Year Warranty
Buy Now: ~~$24.90~~ $15.86

3.3 Watt LED Lamps

The Dauer Lampen 3.3 Watt Wedge is a high powered 12 Volt (AC or DC) lamp. It uses (27) highly efficient SMD 5050 Flat Chip LEDs which use only a total of 3.3 Watts of energy while maintaining a very nice quality of light. Light output is similar to a 20 watt Standard bulb with 16.5% of the power required by the 20 watt bulb.These lamps are virtually identical in physical size to a standard Wedge bulb which makes them ideal for many different lighting applications including retail lighting, accent lighting, recesses lighting, track lighting, landscape lighting, & architecural lighting. TJB-INC uses them as direct replacement LED lamps for the Kerr Lighting line of products (Paver,Retaining Wall, Deck & Dock Lights).

5 year full warranty (not pro-rated)
50,000 + hour rated life
(27) CMD 5050 (top of the line) Hign Output Flat Chip Diodes
360 degree light spread
Warm 2800 Kelvin Light Temperature (Warm White)
Initial Lumen of 260 lm - 300 lm at full power
Operating Cost of $0.007 per 24 hrs (Calculated @ $0.10 per KW)
Highly efficient chip set at 90.9 lumens per watt
Light output similar to a Standard 20 watt bulb
18.44 mm wide x 39.83 mm long
Suitable for enclosed fixtures - Low body temp <60 degrees Celcius
UL Listed for Damp Locations - Lamps are coated with a thin plactic film to make them weather resistant. (Not for water submersion)
Energy Star Rated at 3.3 watts
Quanity Discounts at 10+, 50+, & 100+ Lamps

Use the Comparison Picture below to see the difference between the bulb/lamp options we offer. We used (5) Residential 4" x 8" fixtures below to show the the different lamp outputs. To view this lager, go to the main photo above and click on "View Enlarged Image".

Visit Replacement Parts & Bulbs for Kerr Lighting to see additional products in this category.

12 Volt AC/DC Dauer T5 Wedge LED with 20 SMD 5050 WW Flat Chip Diodes - 2.6 watt - 5 Year Warranty

Thu, 7 Nov 2013 15:11:00 GMT

12 Volt AC/DC Dauer T5 Wedge LED with 20 SMD 5050 WW Flat Chip Diodes - 2.6 watt - 5 Year Warranty
Buy Now: ~~$23.75~~ $15.12

2.6 Watt LED Lamps

The Dauer Lampen 2.6 Watt Wedge is a high powered 12 Volt (AC or DC) lamp. It uses (20) highly efficient SMD 5050 Flat Chip LEDs which use only a total of 2.6 Watts of energy while maintaining a very nice quality of light. Light output is similar to a 13 watt Standard bulb with 20% of the power required by the 13 watt bulb.These lamps are virtually identical in physical size to a standard Wedge bulb which makes them ideal for many different lighting applications including retail lighting, accent lighting, recesses lighting, track lighting, landscape lighting, & architecural lighting. TJB-INC uses them as direct replacement LED lamps for the Kerr Lighting line of products (Paver,Retaining Wall, Deck & Dock Lights).

5 year full warranty (not pro-rated)
50,000 + hour rated life
(20) CMD 5050 (top of the line) Hi-Output Flat Chip Diodes
Operating Cost $0.0058 per 24 hrs (Calculated @ $0.10 per KW)
360 degree light spread
Warm 2800 Kelvin Light Temperature (Warm White)
Initial Lumen of 190 lm - 220 lm at full power
Output similar to an 13 watt Standard Bulb
Highly efficient chip set at 84.6 lumens per watt
IP65 rated for dust and water
19 mm wide x 47.80 mm long
Suitable for enclosed fixtures - Low body temp <60 degrees Celcius
UL Listed for Damp Locations - Lamps are coated with a thin plactic film to make them weather resistant. (Not for water submersion)
Energy Star Rated at 2.6 watts
Replaces a #912 Incandescent bulb
Quanity Discounts at 10+, 50+, & 100+ Lamps

Visit Replacement Parts & Bulbs for Kerr Lighting to see additional products in this category.

NEW:12 Volt AC/DC Dauer T5 Wedge Warm LED w/ 2 Large SMD Flat Chip Diodes - 2 watt - 5 Year Warranty

Thu, 7 Nov 2013 13:14:00 GMT

NEW:12 Volt AC/DC Dauer T5 Wedge Warm LED w/ 2 Large SMD Flat Chip Diodes - 2 watt - 5 Year Warranty
Buy Now: ~~$23.75~~ $15.88

2 Watt Warm LED Lamps

The Dauer Lampen 2 Watt Encapsulated Wedge is a high powered 12 Volt (AC or DC) lamp. It uses (2) highly efficient Large SMD Flat Chip Warm LEDs which use only a total of 2 Watts of energy while maintaining a very nice quality of light. Light output is similar to a 7 watt Standard incandesent bulb with 28% of the power required by the 7 watt bulb. These lamps are virtually identical in physical size to a standard Wedge bulb which makes them ideal for many different lighting applications including retail lighting, accent lighting, recesses lighting, track lighting, landscape lighting, & architecural lighting. TJB-INC uses them as direct replacement LED lamps for the Kerr Lighting line of products (Paver,Retaining Wall, Deck & Dock Lights).

5 year full warranty (not pro-rated)
50,000 + hour rated life
Operating cost is $0.005 per 24 hr run time (@$.10 per KW)
(2) Large CMD (top of the line) High Output Flat Chip Warm Diodes
360 degree light spread
IP65 Rated for Dust & Water
0.4" (10mm) W x 1.625" (41mm) H
Warm 2800 Kelvin Light Temperature (Warm White)
Lumen of 210 lm at full power
Highly efficient chip set at 105 lumens per watt
Light output similar to a Standard 7-watt bulb
Replaces a 906 & 918 bulb
Suitable for enclosed fixtures - Low body temp <60 degrees Celcius
UL Listed for Damp Locations - Encapsulated Housing (Not for water submersion)
Energy Star Rated at 2 watts
Works in AC or DC power
Quanity Discounts at 10+, 50+, & 100+ Lamps

Visit Replacement Parts & Bulbs for Kerr Lighting to see additional products in this category.

Kerr Lighting Individual Replacement Lens for our StackedStone Wall Light

Sun, 10 Apr 2011 15:30:00 GMT

Kerr Lighting Individual Replacement Lens for our StackedStone Wall Light
Buy Now: $19.95

Kerr Lighting Replacement Lens - StackedStone Wall Light

This replacement lens can be used in all Kerr Lighting 12" x 4" StackedStone Wall Light fixtures.
Lens does not include base, socket, or lamp. These are all sold seperately. (See Bottom of this page)

To View Paver Light Installation Instructions "CLICK HERE".

NOTE: (To return to this screen, click your brower's Back Arrow located in the upper left corner of your screen.)

Visit Replacement Parts & Bulbs for Kerr Lighting to see additional products in this category.

Kerr Lighting Individual Replacement Lens for our RiverStone Wall Light

Sun, 10 Apr 2011 15:26:00 GMT

Kerr Lighting Individual Replacement Lens for our RiverStone Wall Light
Buy Now: $19.95

Kerr Lighting Replacement Lens - RiverStone Wall Light

This replacement lens can be used in all Kerr Lighting 12" x 4" RiverStone Wall Light fixtures.
Lens does not include base, socket, or lamp. These are all sold seperately. (See Bottom of this page)

To View Paver Light Installation Instructions "CLICK HERE".

NOTE: (To return to this screen, click your brower's Back Arrow located in the upper left corner of your screen.)

Visit Replacement Parts & Bulbs for Kerr Lighting to see additional products in this category.

Kerr Lighting Individual Replacement "Flat Wedge" Style Light Socket Used in Newer Style Lights

Thu, 24 Jun 2010 14:43:00 GMT

Kerr Lighting Individual Replacement "Flat Wedge" Style Light Socket Used in Newer Style Lights
Buy Now: $3.95

Kerr Lighting - Individual Replacement Light Socket

This socket can be used in all newer Kerr Lighting Fixtures, Commercial & Residential.
Socket has an orientation hole in the bottom of the flat portion of the socket. (see photos)
Accepts a 12-volt "Flat Wedge" Style Bulb used in all Kerr Lighting and most other outdoor lighing fixtures that use a "Flat Wedge" Bulb.
Each of the Pig-Tail Wires are at least 8" in Length
Pig-Tail Wires are 22-gauge/Copper Stranded AWM Style 1230 rated to 105 Celcius and to 600-volt FT1 (Electrical Engineer Jargon)
If your old socket has 1 black & 1 white wire pigtail,and no hole in the middle, these are not the correct direct replacement sockets.
The black socket has a pair of brass clips for bulb contacts & retention.
Click on "View Enlarged Image" (under main photo) to view new style socket mount in a light fixture.
Sold Individually.

NOTE: This socket will not fit the 3156 bulb used in some newer lighting fixtures.

SHOPTJB TIP: If you need replacement sockets for older Kerr lighting fixtures and they do not have a hole in the middle of the socket, you will still have to use these sockets. The original manufactuer of the non-hole sockets no longer exsists. You can use these new sockets but you will have to modify the mounting. The old style sockets used a wider profile clip system and the newer ones are too small for the clips too work. Do not panic! There is a solution. What we have used that does works, is getting a tube of black silicone (Window & Door or Kitchen & Bath), then squirting a blob on to the fixture base between the socket clips. Then, place the new replacement socket flat down into the silicone. Use some tape to hold in place until the silicone hardens in 6-12 hrs. Then remove the tape and the new socket will be secured in place ready for use. The silicone is a great adhesive as well as being waterproof.

Visit Replacement Parts & Bulbs for Kerr Lighting to see additional products in this category.

Kerr Lighting Individual Replacement Lens for our Garden Wall Light

Sat, 12 Apr 2008 13:45:00 GMT

Kerr Lighting Individual Replacement Lens for our Garden Wall Light
Buy Now: $15.95

Kerr Lighting Replacement Lens - Garden Wall Light

This replacement lens can be used in all Kerr Lighting 12" x 4" Garden Wall Light fixtures.
Lens does not include base, socket, or lamp. These are all sold seperately. (See Bottom of this page)

To View Paver Light Installation Instructions "CLICK HERE".

NOTE: (To return to this screen, click your brower's Back Arrow located in the upper left corner of your screen.)

Visit Replacement Parts & Bulbs for Kerr Lighting to see additional products in this category.

Kerr Lighting Individual Replacement Lens for our Retaining Wall Light

Sat, 12 Apr 2008 13:42:00 GMT

Kerr Lighting Individual Replacement Lens for our Retaining Wall Light
Buy Now: $15.95

Kerr Lighting Replacement Lens - Retaining Wall Light

This replacement lens can be used in Kerr Lighting 6" x 8" Retaining Wall Light fixture.
Lens does not include lens, socket, or lamp. These are all sold seperately. (See Bottom of this page)

To View Paver Light Installation Instructions "CLICK HERE".

NOTE: (To return to this screen, click your brower's Back Arrow located in the upper left corner of your screen.)

Visit Replacement Parts & Bulbs for Kerr Lighting to see additional products in this category.