Economy Priced Pro Foam Gun
Our most popular foam gun. The gun enables the user to adjust the product flow, thereby reducing waste. The gun is hermetically sealed, which prevents hardening of the product in the gun. The basket has been costed with Teflon for easy cleaning.
- Lightweight but Sturdy Nickel coated brass construction
- Metal Control Valve & Dispensing Shaft (not cheap plastic)
- Good Bead Control
- Allows variable bead size with Flow Control Screw
- 6" Nozzle to get deep into crevices between rocks
- Barbed dispenser tip allows for attachment of a common disposable straw to extend the reach of the foam gun between large rocks
- Restartable
- Pinpoint Control
- Create beads from 3/8" to 3" wide
- Maximum Yield from cans
- Less foam waste than with canned foam
- No post-dispensing foam drip
- Universal Teflon coated basket fits most 24-33 oz Foam Cans (Aquascape, Easy-Pro, Alantic, Pro-Foam, Great Stuff, Hilti, Pond Builder, and more!)
- Total Length of Gun = 11"
- Net Weight = 450 grams/1 lb. 2 oz.
Thirty Day Restartability
The Pro Foam dispensing gun is designed to create an airtight and moisture-tight seal between the gun and the can. This prevents the foam from curing and blocking the dispensing valve, letting you reuse the can over a one month period. When storing foam, always keep a gun securely attached to the top of the can.
Pinpoint Control of Foam Bead
The Pro Foam gun has a flow control screw mechanisim located on the back allowing you to dispense beads from 1/8" to 3" size. The gun tip design permits you to place the bead precisely where you want it. One-hand operation eases use in tight spots and hard-to-reach areas. This gun has a barbed end that will allow the addition of a common straw to lengthen the overall reach of the gun.
Maximum Yield
Restartability with the dipensing gun combined with pinpoint control of the bead size allow you to maximize the foam yield from every can. High yield and minimal waste translate to lower costs for you.
NOTE FROM SHOPTJB: For proper flow of foam, the foam can temperature must be above 50 degrees. If you are planning to use the foam when the outside temperatures are below 50 degrees, make sure to warm up the cans/foam by using a car or truck heater or put cans in the sun to warm up the foam. TJB-INC puts the foam cans on the dashboard of the truck in the sun and we use the truck's defroster to keep the cans warm when we are working in colder weather.
