TJB-INC - Water Garden & Pond Products / Pond /Stream/Water Garden Lights & Transformers / Transformers / All Products

Aquascape's Pond Owners Manual For Water Garden & Pond Lovers

Sat, 23 Mar 2013 10:08:00 GMT

Aquascape's Pond Owners Manual For Water Garden & Pond Lovers
Buy Now: $3.99

Aquascape's

Pond Owners Manual

We offer a copy of the full color, 24 pg "Pond Owner's Handbook" in both as a printed booklet and as a download in a .pdf. This handbook covers all of the topics that a pond owner will need to know about.

Pond Ecology & the Aquascape System
Pond Fish - Health & Care
Aquatic Plants
Pond Myths
Maintenance
Pump Trouble Shooting

To download the .pdf file, CLICK HERE.

To view more Aquascape videos CLICK HERE

Visit Transformers to see additional products in this category.

Cal Pump Power Control Center for Underwater & Landscape Lighting

Fri, 6 Nov 2009 08:56:00 GMT

Cal Pump Power Control Center for Underwater & Landscape Lighting
Buy Now: ~~$199.99~~ $169.50

Power Control Center

The Power Control Center allows backyard water gardeners the flexibility of installing a pond where no electricity is near the pond site. Now you can control the operation of your pumps, U.V. Clarifiers, underwater lights, and other necessary items with the Power Control Center. The ultimate luxury to power your pond.

This has to be "The best thing since sliced bread" for ponders. One of the biggest problems with installing a pond is to add electricity near the pond. Now with this Power Control Center you have 50 ft of Grounded Cord. This means 50 ft from your current electrical outlet. Also, you have 4 - 120V electrical outlets and 2 - 12V low voltages outlets. And get this, there is are 2 digital timers: 1 for the 120V and 1 for the 12V side.

Class II Rated (see info below)
There are total of six progamable options per timer per day
Easy to Set Digital Timers control both line voltage & low voltage
Also Great for Holiday & Security Lighting
Weather Resistant Construction for Safety & Durability
Mounting Bosses for Mounting Convenience
Dimensions: 8.25"W x 5"D x 6.5"H
50' Heavy Duty 12-Gauge Power Cord
Input: 120V; 50/60Hz
Output 1: 120V, 60Hz, 5A max with timer I
Output 2: 120V, 60Hz, 5A max
Output 3: 12V AC, 150 Watts with timer II
Total Output 10A max

NOTE: Cal Pump transformers reduce 120 volt to a safe, economical 12 volt power supply for many low voltage applications, with the added convience of programmable digital timers. These transformers eliminate the risk of electrical shock to children and animals if the cable is accidentally damaged or cut. Ul Listed for underwater & dry applications. Transformer is solid state and may cause flickering with some LED fixtures.

Installation
Locate the Power Control Center (PC50-15) in a dry and protected area. There are mounting bosses on the back of the unit for convenient installation. It is recommended that the Power Control Center (PC50-15) be mounted at least 3 feet above ground level. You may plug the unit directly into a properly grounded, grounding-type receptacle equipped with a Ground Fault Circuit Interrupter (GFCI).

Timer Controls
The minimum setting time is one minute and the maximum setting time is 24 hours. There are a total of six ON-OFF positions. The light will stay lit during the programming for one minute.

SETTINGS:
MODE- Switch to programming (the word "MODE" does not appear).
RUN - Automatic Operation
ON
OFF

Plug the power supply cord into an outlet that is 120 volts AC 60 Hz.
Press "RESET" button once to clear all programs.
Setting the time: Press "SET" and then press "HOUR" and "MIN" button to adjust the current time (Military Time).
Press the "SET" once and the screen will display "1 ON".
Press "HOUR" button until desired time is reached.
Press "MIN" button until desired time is reached.
Press "SET" button to set the "off time" and the "ON" will disappear from the screen. Now press the "HOUR" and "MON" button to set the "off time".
Repeat Steps 3 through 6 for maximum of 36 programmable options per day.
When finished programming, press the "MODE" button until "RUN" is displayed on the screen to start operation.

To override the program, press the "MODE" button until "ON" is displayed. To turn off, press "MODE" button until "OFF" is displayed. For automatic operation, you must put the unit back into "RUN" mode.

NOTE: This unit is equipped with a RESET button. In the event of a programming malfunction, press the RESET button. This will clear all programs. Repeat STEPS 1 through 9 to program timer.

CAUTION:

To reduce risk of fire, replace only with the same Type 15A, 125V (or above) fuse.
Not for use with dimmers.
Disconnect all power supplies before servicing.
If installation involves running wiring through a building structure, special wiring methods are required. Consult as a qualified certified electrician

Class II transformers that are pool/spa rated. National Electrical Code 2008

“680.23 Underwater Luminaires.

This section covers all luminaires installed below the normal water level of the pool.

(A) General.

(1) Luminaire Design, Normal Operation. The design of an underwater luminaire supplied from a branch circuit either directly or by way of a transformer meeting the requirements of this section shall be such that, where the luminaire is properly installed without a ground-fault circuit interrupter, there is no shock hazard with any likely combination of fault conditions during normal use (not relamping).

(2) Transformers. Transformers used for the supply of underwater luminaires, together with the transformer enclosure, shall be listed as a swimming pool and spa transformer. The transformer shall be an isolated winding type with an ungrounded secondary that has a grounded metal barrier between the primary and secondary windings.”

Visit Transformers to see additional products in this category.

Cal Pump Transformers for Underwater & Landscape Lighting

Fri, 6 Nov 2009 07:49:00 GMT

Cal Pump Transformers for Underwater & Landscape Lighting
Buy Now: $74.99

Transformers with Digital Timer

Cal Pump transformers reduce 120 volt to a safe, economical 12 volt power supply for many low voltage applications, with the added convience of programmable digital timers. These transformers eliminate the risk of electrical shock to children and animals if the cable is accidentally damaged or cut. The TRT75 and TRT150 transformers are ideal for powering all of your low voltage lighting.

Class II Rated (see info below)
Ul Listed for underwater & dry applications
Weather Resistant case and be mounted outdoors
Available in 75-watt & 150-watt
Digital Timer allows up to 6 programmable options per day
Easy to program
Includes mounting template
Not for use with dimmers
Small in size, easy to hide in landscape (6' H x 4 3/8" W x 2 1/2" D)

Note: These are solid state transformers and may cause flickering with some LED fixtures.

Class II transformers that are pool/spa rated. National Electrical Code 2008

“680.23 Underwater Luminaires.

This section covers all luminaires installed below the normal water level of the pool.

(A) General.

Visit Transformers to see additional products in this category.

Aquascape 3-Way Splitter for 12 Volt Lighting for Aquascape Lights w/Quick-Connect

Thu, 19 Feb 2009 18:16:00 GMT

Aquascape 3-Way Splitter for 12 Volt Lighting for Aquascape Lights w/Quick-Connect
Buy Now: ~~$13.98~~ $11.35

3-Way Splitter for 12 Volt Lighting for Aquascape Lights w/Quick-Connect Plug

Provides a simple connection of 3 light fixtures
to a single transformer.

Multiple 3-way quick-connect adaptors can be chained together to attach additional fixtures.

Includes 8” cord length.

NOTE: If you want to use one of our Aquascape Manual Transformers, this item will allow a fixture that does not have a Quick Connect plug, you can use this connector. You will have to cut of the end of the wire that has the 3-way connector. This will leave you with a Quick Connect plug and an 8" pig-tail wire that you will strip off the insulation off the ends and connecting your wires or lights.

Visit Transformers to see additional products in this category.

Aquascape Manual 12 Volt Transformers for Water Garden & Pond Lighting

Thu, 19 Feb 2009 18:06:00 GMT

Aquascape Manual 12 Volt Transformers for Water Garden & Pond Lighting
Buy Now: ~~$31.98~~ $25.58

Manual 12-Volt Transformers

Transformers for Aquascape LED Pond Lights. All of Aquascape's transformers are designed to be used with both LED or Halogen fixtures. Calculate the total wattage of the fixtures on the project and select the appropriate watt transformer.

Class II Rated (see info below)
Simple plug-in transformers provide an economical solution for operating low voltage lighting fixtures.
Transformer includes a single quick-connect cable port for adding a light.
Multiple light fixtures can be added by using the 3-Way Splitter (SKU#98489) sold separately.
No timers or photo-cells. Use a switched outlet, separate timer, or add Aquascape 12 volt Photocell (see related products below)
Available in 3 different sizes: 6-Watt, 20-Watt, & 60-Watt
These transformers are UL Listed and can be used outdoors.
Safe for submersible fixtures
The 6-Watt has a plug built in to the side of the unit.
The 20 & 60-Watt have a 6' cord so the transformer can be mounted up to 6' away from the power outlet.

NOTE: These transformers are made for Aquascape LED lights which have a special Quick Connector plug which goes into a special Quick Connector receptacle on the transformer. There are no screw terminals on these transformers. To use with other low-voltage light fixtures, you have 2 options.

You can purchase the 3-Way Splitter (SKU#98489) and cut off the 3-way splitter end leaving just the special plug thats mates with the transformer and 8" of wire that you can then attach your lights to. (See Related Items Below)
We offer a Quick Connector Plug with 12" wire leads for and additional $3.50. (Just check the box at the top of the screen).

Low-voltage, systems have several advantages for the home owner: Most important, low-voltage equipment is easier to install. Except for the transformer that's connected to a 120-volt circuit, the entire system runs on harmless 12-volt current. Low-voltage wiring is lightweight and can be laid on the ground or buried just below the surface. Another advantage of low-voltage equipment is that it can be relatively inexpensive. And, when you do the job yourself, the bottom line for low-voltage looks even better. Not only can the capital outlay for a standard high-voltage system be much greater, but you may need to hire a pro for part or all of the installation.

You must size your low voltage transformer to match the combined wattage of the lights or lamps to which the transformer is to supply power plus approximately 25% more for the line.

Sizing your Transformer Example: If you buy a system that comes with six fixtures and each fixture has a 12 watt lamp, then you have a minimum need of 72 watts (12 x 6 = 72). The line itself degrades the wattage as well so as a general rule of thumb you will need to increase it by 25% more. Therefore you'll need at least a transformer that can handle about 90 watts. So a 100 watt transformer would be the minimum needed. If you plan to add additional fixtures in the future, you may want to increase the wattage of the transformer or purchase additional transformers as needed. Keep in mind that the voltage drop over long distances is more pronounced in a low-voltage system, therefore, using wire that's too light (skinny) can affect the output at the lamps and this may adjust the wattage need of your low voltage transformer.

Class II transformers that are pool/spa rated. National Electrical Code 2008

“680.23 Underwater Luminaires.

This section covers all luminaires installed below the normal water level of the pool.

(A) General.

Visit Transformers to see additional products in this category.

Aquascape Water Garden & Pond LED Bullet Spotlight 6 Watt 12-Volt Transformer

Tue, 9 Oct 2007 16:29:00 GMT

Aquascape Water Garden & Pond LED Bullet Spotlight 6 Watt 12-Volt Transformer
Buy Now: ~~$29.98~~ $23.98

LED Bullet Spotlight Transformer

Class II Rated (see info below)
Required to power our LED Bullet Spotlight.
Energy efficient, only consumes a couple of watts of power.

Class II transformers that are pool/spa rated. National Electrical Code 2008

“680.23 Underwater Luminaires.

This section covers all luminaires installed below the normal water level of the pool.

(A) General.

Visit Transformers to see additional products in this category.

Aquascape Universal Remote Photocell w/Memory Chip For Low Voltage 12-volt Transformers

Tue, 9 Oct 2007 16:29:00 GMT

Aquascape Universal Remote Photocell w/Memory Chip For Low Voltage 12-volt Transformers
Buy Now: ~~$29.99~~ $23.98

Remote Photocell

Add photocell capability to any non-photocell transformer under 300 watts.
Just plug your transformer into one of the 2 recepticals.
Programmable photocell can be set for 1-9 hrs intervals for your lights to be on after sunset.
This unit does not need to be adjusted to reset anfter a power outage or for Daylight Savings.
This unit can be used for automaticlly powering a transformer from remote location

To view the written Remote Photocell Instruction Manual (English & French) in a Down-loadable PDF file that can be printed, click on the link "DOWNLOAD FILE"

You must size your low voltage transformer to match the combined wattage of the lights or lamps to which the transformer is to supply power plus approximately 25% more for the line.

Visit Transformers to see additional products in this category.

12 Volt Outdoor Transformers W/ Photocell & Timer Controls For Low Voltage Outdoor Lighting Fixtures

Tue, 9 Oct 2007 16:28:00 GMT

12 Volt Outdoor Transformers W/ Photocell & Timer Controls For Low Voltage Outdoor Lighting Fixtures
Buy Now: ~~$94.98~~ $75.98

Low-Voltage 12-Volt Transformers With Photo Cell

We Sell Several Different Name Brands

Old style mechanical dial timer has been replaced by more reliable photocell.
Set desired on time in 2, 4, 6, 8, or 10 hour intervals after sunset, Dawn to Dusk, or controled by a switched outlet.
No need to adjust for time changes, or seasonal changes of sunset.
Does not need to be adjusted to reset after power outages or daylight savings.
UL listed for outdoor installations and mounting
Hampton Bay 45, 120, 200, 300-watt with remote photocell
Moonrays 120 (limited supply) Built in Photocell
TDC 100, 300 (Multi-Tap) Built in Photocell
Not Class II rated for Submersible Luminaries (Except ADI 60-Watt Transformer)
Not for use with dimmer circuits.
2-Year Warranty

Several Sizes & Style Available:

Hampton Bay 45-Watt (7½" H x 4¾" W x 3" D) with 5' Remote Photocell
ADI 60-Watt (7" L x 3 1/2" H x 3 1/2" W) Built-in Photocell (CLASS II)
TDC 100-Watt (6 ½" L x 4 ¼" W x 3½" H) Built-in Photocell (Used in most of our pre-made lighting kits)
Hampton Bay 120-Watt (9" H x 5½" W x 3" D) with 5' Remote Photocell
Moonrays 120-Watt (6" H x 4" W x 3½" D) Built-in Photocell
Hampton Bay 200-Watt (8 3/8" H x 5" W x 4 1/8" D) with 5' Remote Photocell
Portfolio 200-Watt (6 7/8" H x 4 ½" W x 4¼" D) Built-in Photocell
Hampton Bay 300-Watt (9 ½" H x 5¾" W x 3¼" D) with 5' Remote Photocell
TDC 300-Watt Multi-Tap (10 ½" H x 5" W x 5" D) Built-in Photocell, Stainless Steel Housing 12V, 13V, 14V, 15V Outputs. (This the recommended transformer for long wire runs and large light fixture installations)

Voltage Loss for low voltage lighting for landscape systems

How to use large transformers:

First of all there are three important facts to consider before loading any transformer.

Total Load (add wattage from all fixtures)
Distance (length of wire run)
Wire Gauge (thickness of copper wire)

All three must be considered when designing a low-voltage system system.

Larger transformers need to be used in a manner that will allow all lighting fixtures on a specific run to evenly illuminate. In some cases there will need to be more than one line out from the transformer.

An example of a system using 2 output lines from the transformer would be as follows:

(Line 1) 12 gauge wire with a 150 watt load extending a total of 43’ from the transformer
(Line 2) 12 gauge wire with an additional 150 watt load extending 68 feet from the transformer, with the first fixture starting at 43’ from the transformer. The two different wire runs would attach to the same place on the transformer.

The 600 watt transformer has two 300 watt outputs. Use these 2 separate outputs to split the load instead of trying to run 600 watts on one run. If the loads are not split the system will not work. The 900 watt transformer has three 300 watt outputs.

Voltage Drop Chart

Maximum recommended wattage load & distance from the transformer before having additional voltage drop below the minimum recommended 10.5 volts.

	Wattage Load	50W	100W	150W	200W	250W	300W
	Wire Gauge
12 Volt Output	14 ga.	81'	40'	27'	20'	16'	13'
	12 ga.	129'	65'	43'	32'	26'	21'
	10 ga.	204'	102	68	51	41	34
	8 ga.	317'	158'	105'	79'	63'	52'

* Note: Min. Volts on the load is 10.5V @ 20 ° C; Distance in feet

Example: If you plan to run (5) 20-watt fixtures (100-watts total) that are going to be located 50' from the transformer, then you will need to use 12 gauge wire for a single wire run. If you split the lights into 2 groups, then you would run 2 lines of 14 gauge cable and not have any line loss of power.

You must size your low voltage transformer to match the combined wattage of the lights or lamps to which the transformer is to supply power plus approximately 25% more for the line.

TJB-INC INSTALLATION TIPS

When running low voltage wire, try to keep the length of the wire run from the transformer to the lights less than 100' and put no more than 100 watts of draw per run. If your lights look dim and yellow or orange, this is a sign that they are not getting enough power. It could be you overloaded the wire run with too many light fixtures, the wire size could be too small, and/or the transformer is being over-worked because it is too small for the amount of lights it is powering. You could also try using bulbs with less wattage and see if that helps first. If not, then you will need to redesign your layout with larger guage wire and larger transformers. If you have multible runs of wire, choose a transformer that has multible power taps. Use the HI setting for the long runs, and the LO setting for the shorter runs. This should help with the power loss you were experiencing.
At TJB-INC, anytime we are doing an installation with a moderate to long run of wire, we use the 12/2 gauge wire to be safe. If we are just going around a small to medium pond, we will use the 16/2 wire as long as the wattage draw from the bulbs does not go over 100 watts.

Class II transformers that are pool/spa rated. National Electrical Code 2008

“680.23 Underwater Luminaires.

This section covers all luminaires installed below the normal water level of the pool.

(A) General.

Visit Transformers to see additional products in this category.